PCBN Solid CBN Cutting Tools

PCBN insert are compound super-hard material of polycrystalline cubic boron nitride layer and WC(Tungsten carbide) sintered under ultrahigh pressure and high temperature. The PCBN insert has the hardness, wear resiance and thermal stability of cubic boron nitride(CBN) and the shock-resistant toughness of hard alloy. It is the ideal material of cutting processing of high-hard ferrous metal and non-ferrous metal alloy.
Other type of insert like RCGN CBN insert. RCGN insert, SNGA, SCMW, TNGA, CNGA, VNGA, VCGW, CCMW, TCMW CBN insert all available upon request, our product test well in European countries, Japan and USA markets.
PCBN: Ease of fabrication, easily cut with wire WDM and High grind ability with diamond wheels
Typical Product machined with PCBN Tools-Automotive/Medical/Aerospace
Shafts, Gears, Brake, Dies, Molds
Clutch Plates, Brake Rotors/Drums, Cylinder, Blocks, Flywheels, Heads
Camshafts, Valve Bodies
Impellers, Casings, Valve Guides
Turbine Blades, Vanes, Shrouds, Housings, Hubs, Hip Joints
Pipe/Liners, Fuel Rod
Valves Seats, Hydraulic Pumps, Cam Lobes
PCBN solid CBN cutting tools WNGA080408

Machining harden steel with HRC50-67, general gray cast iron with HB about 200, high hardness cast iron with HRC50-64 and so on!

Harden steel with HRC50-67, Cutting speed, 50-150 m/min; Feed, 0.05-0.12 mm/rev; Cutting deepth, about 0.2mm

General gray cast iron with HB about 200, Cutting speed, 500-1000 m/min; Feed, 0.1-0.5; Cutting deepth, about 3.0mm

High hardness cast iron with HRC50-64, Cutting speed, 50-100 m/min; Feed, 0.1-0.3 mm/rev, Cutting deepth, about 2.5mm

Specification: Completed, for example, RNGN0803MO, RNGN1204MO, RNGN1304MO
Packing: Standard, 10 PCS in a plastic box with sponge or single plastic box inside, carton box outside
We have mass stock of original Taegutec inserts now.